AIRYX · ICAD SERIES · TWO INDEPENDENT NO₂ PATHS

ICAD-NO₂-210DT-M

A mobile Twin Inlet analyser for simultaneous NO₂ measurement from two independent sampling points. Two inlets and two ICAD cells allow direct comparison of both streams without valve switching or a time offset.

AIRYX ICAD-NO2-210DT-M analyserICAD-NO₂-210DT-M
2 pointsparallel sampling through independent inlets
2 × ICADa dedicated measurement cell for each line
from 1 stime resolution on both channels
IP64mobile dust- and weather-resistant enclosure
Twin Inlet

Two measurements made at the same time

Each sample line has its own inlet and measurement cell. The results are synchronised, allowing two locations or the concentration before and after a test object to be compared directly.

No switching between sample lines

Both paths determine NO₂ directly from its absorption spectrum at approximately 430-480 nm. The instrument does not measure NO or NOx - both channels are dedicated to selective NO₂ measurement.

two independent sample inlets
two ICAD cells operating in parallel
direct NO₂ detection without analyte conversion
no sample drying required
automated zero measurements reduce noise and drift
Sampling point A
→
ICAD cell A · NO₂
Sampling point B
→
ICAD cell B · NO₂
Two synchronised NO₂ results
Mobile M configuration

Prepared for field measurements

The UV-resistant polycarbonate enclosure protects the system during mobile campaigns and temporary outdoor installations.

Mobile AIRYX ICAD-NO2-210DT-M construction

IP64 enclosure

A dust- and weather-resistant construction with connectors suited to operation outside the laboratory.

AIRYX ICAD analyser interface

Wi-Fi operation

Both-channel results, time series and diagnostics are available from a PC, tablet or phone without an additional app.

Instrument technical data

ICAD-NO₂-210DT-M specification

Parameters for the dual-channel Twin Inlet configuration in the mobile M enclosure.

Measurement arrangement
Measured componentNO₂ on both channels - direct ICAD spectroscopy
Sample inlets2 independent inlets for parallel sampling from two lines
Measurement cells2 independent ICAD cells operating simultaneously
Measurement range0-5000 ppb per channel; custom configurations available
Time resolutionminimum averaging time 1 s; typical delivery setting 5 s
Detection limit, 2σapproximately 0.09 ppb at 60 s for a standard Series 210 cell
Precision, 1σup to 0.40 ppb at 1 s and up to 0.05 ppb at 60 s
Response time, 10-90%below 2 s at 2 l/min; adjustable flow
Zero driftbelow 0.1 ppb/month; regular automated zero measurements
Temperature sensitivitybelow 0.01 ppb/°C
Spectral rangeapproximately 430-480 nm
Effective optical pathup to 2 km in the resonator cell
Cross sensitivityeffects from water, ozone and glyoxal are eliminated or resolved spectrally; no significant cross sensitivity to typical matrix components
Sample and calibration
Sample flow1-2 l/min, adjustable; independent lines for both sampling points
Sample preparationsample drying is not required; PTFE aerosol filters are used
Path-length characterisationhelium every 1-2 years as an option or an NO₂ reference measurement; gas-free ICOM method subject to confirmation of availability in the current software version
NO₂ calibrationNO₂ calibration gas is not required; concentration is derived using literature absorption data
Zero-air systemintegrated filter; regular 115 ml or high-capacity 400 ml version available
Consumable gasesno gases required for normal operation
Enclosure and operating conditions
EnclosureUV-resistant polycarbonate, IP64, dust- and weather-resistant construction
Dimensions43.6 × 13.2 × 30.0 cm
Weightbelow 10 kg, depending on configuration
Operating temperature-10 to +25°C; up to approximately +40°C with optional cooling
Start-up timetypically below 1 min
Power12 V DC; external power supply selected for the configuration
Power consumptiontypically below 30 W for the Series 210 platform; dependent on optional equipment
Mechanical stabilityinsensitive to ordinary vibration and absolute light-source intensity
Control, communication and equipment
Processing unitembedded PC with analysis and measurement software
User interfacebrowser interface accessible through Wi-Fi on a PC, tablet or phone
Data interfacesLAN, Wi-Fi, RS232, M2M, OPC UA, Bayern-Hessen protocol; optional voltage and current outputs
Geolocationoptional external GPS with position storage and time synchronisation
Diagnosticsgas-flow, supply-voltage and critical-temperature checks; span adjustment in the interface
Service equipmentPTFE aerosol filters, maintenance kit, zero-air cartridges and an NO₂-path spare-parts kit
Optionsoperator tablet, GPS, cell cooling, high-capacity zero filter and an integrated CO₂ sensor selected for the application
Model applications

When simultaneous comparison matters

The dual-path arrangement removes the timing error caused by sequential point switching and captures rapid concentration changes.

Before and after a systemparallel assessment of a process or abatement component
Two workplacessimultaneous comparison of exposure at two locations
Indoor and outdoor aircomparison of air quality inside and outside a facility
Scientific researchsynchronised reference measurements and chamber experiments
Field campaignsmobile point comparison without moving a single inlet

Enquire about ICAD-NO₂-210DT-M

We will select both line lengths, filtration, range, data logging, GPS and equipment for the locations being compared.

Contact MES-EKO