AIRYX · Open Path · High Grade

AIRYX Open Path High Grade

Multi-gas DOAS system up to 3 km

An active, modular Long-Path DOAS system for continuous path-averaged gas measurements. Its separate telescope, stabilised analyser and retroreflector let the optical configuration match each installation.

AIRYX Open Path High Grade measurement telescope on its automatic mountOPEN PATH HIGH GRADE
◇
DOASmulti-gas spectral analysis
✓
LED / LDLStwo light-source variants
✓
200 mmtelescope mirror diameter
✓
multi-pathoptional automatic alignment
System architecture

Analyser, telescope and reflector

The analyser is installed indoors or in a sheltered position and connected to the telescope by cables and optical fibres. Separating the components allows the optics to be positioned correctly in the field.

AIRYX Open Path High Grade diagram with analyser, source, telescope and retroreflector
The beam travels to a retroreflector and returns to the telescope. Optional azimuth and elevation drives automatically switch between several measurement paths.
Optical variants

LED or broadband LDLS

Select the source to match the required species and spectral range.

Standard source

High-power LEDs

The standard light source uses three LEDs centred at 275, 310 and 370 nm.

  • 270–380 nm spectrometer
  • typically 0.45 nm FWHM
  • time resolution up to 3 s
Optional source

Laser-Driven Light Source

A broadband Xe lamp / LDLS extends the spectral range and maximum measurement-path length.

  • high UV intensity
  • broad spectral coverage
  • selected for the required species
Measured species

Multi-gas capability

The final species list and detection limits depend on source, path length, atmospheric conditions and averaging time.

BrObromine monoxide
HCHOformaldehyde
HONOnitrous acid
NO₂nitrogen dioxide
O₃ozone
OClOchlorine dioxide
SO₂sulphur dioxide
Technical data

High Grade specification

Values describe the current Open Path family; confirm the final configuration for each project.

Measurement
Methodactive Long-Path DOAS absorption spectroscopy
One-way path length100–3,000 m; 500–1,500 m recommended
Time resolutionup to 3 s; adjustable averaging improves sensitivity
Calibrationno calibration gases; quantification uses literature absorption data
Lamp referenceautomatic, using a reference plate in front of the fibre bundle
Telescope
Optics800 mm focal length; 200 mm mirror; approximately 0.05° field of view
Path alignmentcamera, fibre-bundle motors and automatic optimisation
Fibre configuration6 sending mono fibres and 1 receiving mono fibre; UV fused-silica multi-fibre bundle
EnclosureIP64; water- and snow-resistant design
Weight and dimensionsapproximately 20 kg; 110 × 40 × 36 cm
Operating temperature−20 to +40°C
Mountingaluminium rail system or tripod
Analyser and data
Spectrometer270–380 nm; typically 0.45 nm FWHM; ultra-low stray-light configuration
Detector quantum efficiencyapproximately 60%, back-UV-thinned detector
Noise10⁻⁴ at 1,000 scans, approximately 60 s integration
Light sourcesLEDs at 275, 310 and 370 nm; optional broadband Xe lamp / LDLS
Stabilisationtemperature-stabilised spectrometer and light sources
Weight and dimensionsapproximately 14 kg; 40 × 44 × 13 cm
Softwareincluded; configurable routine, averaging and multiple paths
Data analysispackage for standard trace gases
CommunicationUSB 2.0; standard operation with an external measurement computer, not included in the standard delivery
Sensorstemperature, pressure and humidity
Power12 V; below 70 W
Automation and reflector
Optional drivesazimuth −130° to +130°; elevation 0–30°; automatic multi-path measurements
Retroreflectortwenty 1″ fused-silica corner cubes in an IP64 enclosure; array quantity depends on the application and path length
SpeciesTypical LOD at 1,000 m and 10 s
NO₂1.5 ppb
SO₂0.3 ppb
O₃15 ppb
HCHO4.5 ppb
HONO0.8 ppb
Configuration

System components

High Grade is a configured measurement system rather than a single compact enclosure.

Measurement path

Complete system

  • LED or LDLS telescope and analyser
  • UV retroreflector array
  • 12 V power supply
  • external measurement computer — ordered separately: PC-DE, PC-NB or PC-NBHP
  • data-analysis package

A configuration with a computer embedded in the analyser unit is available as an option.

Recommended / optional

Mounting and automation

  • azimuth and elevation drives
  • aluminium rail system or tripod
  • additional reflectors for multiple paths
  • additional arrays for long UV paths
Applications

Long-path spatial monitoring

Industrial fence linesdiffuse and fugitive emissions
Air qualitycontinuous urban and industrial monitoring
Roads, motorways and portstraffic and shipping emissions
Tomographymulti-path concentration maps
Field researchatmospheric chemistry and pollutant transport
Satellite validationground-based validation of remote-sensing observations
Solution selection

Configure Open Path High Grade

We will select the light source, species, path length and number, reflectors, drives and mounting method.

AIRYXMES-EKOinstrument and measurement-system selectionmeseko@meseko.pl