Home / Open Path monitoring
DOAS · MAX-DOAS · contact-free measurement

Open Path gas monitoring

Path-averaged measurement without sample lines, filters or a conventional conditioning system.

When should Open Path be used?

The method suits applications requiring area representativeness, contact-free measurement or fence-line observation. A system can operate with one or several reflectors.

Fence-line monitoring

Diffuse emissions and incoming pollution.

Agriculture and NH₃

Contact-free ammonia observation over an emission area.

Atmospheric research

Gas and aerosol profiles and spatial distributions.

Components and detection limits
Path length, height and count
Visibility, dust and weather
Power, communication and mounting

AIRYX system families

Compact for specialised tasks and High Grade for extended remote measurements.

Compact or High Grade?

Practical selection notes. The comparison below summarises the key technical decisions.

Method / configurationRole in the system
CompactSpecialised measurement of selected gases along one or multiple paths.
High GradeExtended system with automatic aiming and operation with several reflectors.
GeometryPath length and height determine representativeness and detection capability.

Compact

Specialised measurement of selected gases along one or multiple paths.

High Grade

Extended system with automatic aiming and operation with several reflectors.

Geometry

Path length and height determine representativeness and detection capability.

Important: Open Path provides a path-averaged concentration. It should not be interpreted as a point measurement directly at the source.
What information should be provided with an enquiry?

Target compounds, expected ranges, sample conditions, response-time requirement, installation location and required outputs.

Is the analyser alone sufficient?

Not always. Sampling, conditioning, calibration, data transfer and mounting may be equally important.

Not sure which method is suitable? Start with the measured-component selector and compare instruments available for the target gas.

Ammonia NH₃ measurement

Compare point and Open Path measurement and the sample-path requirements of reactive ammonia.

Open the NH₃ guide

Open Path for agricultural sources

See contact-free NH₃ measurement for livestock, facility boundaries and diffuse sources.

View agricultural application