Home / Toxic and corrosive gases
HCl · HF · NH₃ · low ppb

Toxic and corrosive gas monitoring

Continuous monitoring of demanding compounds in ambient air, at fence lines and in industrial installations.

Why are these measurements demanding?

Reactive and corrosive compounds may adsorb on sample lines, react with moisture and occur at very low levels. The method, sample-path materials and calibration approach must therefore be selected together.

Ambient and cleanroom

Trace levels affecting process and product quality.

Fence line

Diffuse-emission and surrounding-area monitoring.

Industrial installations

Release and concentration monitoring under process conditions.

Compound, range and response time
Moisture, temperature and matrix
Sample-path length and materials
Calibration, alarms and installation point

Measuring reactive compounds

Practical selection notes. The comparison below summarises the key technical decisions.

Method / configurationRole in the system
HClSelective measurement requires moisture control and minimised sample-line losses.
HFVery low concentrations require suitable materials and a stable background.
NH₃Point or contact-free Open Path measurement can be selected for the task.

HCl

Selective measurement requires moisture control and minimised sample-line losses.

HF

Very low concentrations require suitable materials and a stable background.

NH₃

Point or contact-free Open Path measurement can be selected for the task.

Important: For corrosive gases, the sample path is as important as the detector. Poor materials or cold spots may reduce response and bias results.
What information should be provided with an enquiry?

Target compounds, expected ranges, sample conditions, response-time requirement, installation location and required outputs.

Is the analyser alone sufficient?

Not always. Sampling, conditioning, calibration, data transfer and mounting may be equally important.

Not sure which method is suitable? Start with the measured-component selector and compare instruments available for the target gas.